Cisco 860 Series Hardware Installation Manual page 24

Cisco 880 Series ISRs
Figure 1-8
Figure 1-8
1 Primary WAN port—VDSL/ADSL over
POTS
2
4-port 10/100 Ethernet switch
3
Serial port—console or auxiliary
4 PoE power connector—optional
1. 887VA-M has Annex M support.
2. Ports 0 and 1 provide PoE with the optional PoE module installed.
Caution
Figure 1-9
antennas on the back panel. However, the feature locations are similar across all Cisco 880 series data
routers.
Figure 1-9
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
1-8
shows the back panel details of the Cisco 887VA and 886VA-M data router.
Back Panel of the Cisco 887VA and 887VA-M Router
1
1
2
For the Cisco 887VA, the primary WAN port is designed for an RJ-45 connector only. Damage
to the primary WAN port may occur if a non-RJ-45 connector is inserted.
shows the back panel details of the Cisco 888W data router. Nonwireless routers do not have
Back Panel of the Cisco 888W Data Router
1 2
2 3
5 Reset button
6
Power connector
7
Earth ground connection
8 Kensington security slot
3 4 5
Chapter 1 Product Overview
4 5 6 7 8
6 7 8 9 10
OL-16215-10