NETGEAR Trek PR2000 Instalaltion Manual page 17

You are connected wirelessly to the Trek.
6. Repeat Step 1
want to connect to the Trek.
Use WPS to connect a WiFi device to the Trek without entering the
wireless network name or network key. Instead, you log in to the Trek
and either click a button or enter a PIN to connect. WPS supports
WPA and WPA2 wireless security.
 To connect WiFi devices to your Trek with WPS:
1. Log in to the Trek and select ADVANCED > WPS Wizard > Next.
For more information, see the user manual.
2. Select one of the following radio buttons:
• Push Button (recommended). Click the
• PIN Number. Select the PIN number radio button and enter
the client PIN in the field that displays.
3. Use the WPS software on your wireless device to connect to the
Trek.
For more information, see the manual that came with your device.
through Step 5 for each wireless device that you
17
button.