Chapter 3: Power; Power Modes; Primary Events Listing; On Mode - Honeywell HX2 Reference Manual

Chapter 3: Power

Power Modes

Primary Events Listing

Any key on the keypad
l
COM1 activity
l
Stylus touch on the touch screen
l
Docked in powered desktop cradle
l
Power button tap
l
Bluetooth device reconnect / disconnect message
l
Ring scanner activity
l

On Mode

The Display

When the display is On:
the keypad, touch screen and all peripherals function normally
l
the display backlight is on until the Backlight timer expires
l

The HX2

After a new HX2 has been received, a charged battery tethered, and the Power key tapped, the HX2 is always On until both
batteries are drained completely of power.
When the tethered battery and backup battery are drained completely, the unit is in the Off mode. The unit transitions from the
Off mode to the On mode when a charged battery is attached to the tether or external power is applied (for example, by docking
the HX2 in a powered desktop cradle) and the HX2 Power key is pressed.
3-1