Auto Profile - Honeywell HX2 Reference Manual

Auto Profile

Auto Profile allows the user to configure a list of profiles that the SCU can search when a radio connection is lost. After using
the Profile tab to create any desired profiles, return to the Main tab. To specify which profiles are to be included in Auto Profile,
click the List button.
The Auto Profile selection screen displays all currently configured profiles. Click on the checkbox for any profiles that are to be
included in Auto Profile selection then click ok to save.
To enable Auto Profile, click the On button on the Main tab.
When Auto Profile is On, if the radio goes out of range from the currently selected profile, the radio then begins to attempt to
connect to the profiles listed under Auto Profile.
The search continues until:
the SCU connects to and, if necessary, authenticates with, one of the specified profiles or
l
the Off button is clicked to turn off Auto Profile.
l
Note: Do not include any profiles with an
6-6
Ad Hoc Radio Mode in this listing.