Reboot; Warm Boot; Cold Boot; Hx2 Help - Honeywell HX2 Reference Manual

Reboot

When the Windows CE desktop is displayed or an application begins, the power up (or reboot) sequence is complete.

Warm Boot

Start > Run
A warm boot function does not affect the operating system, but data and programs in RAM are cleared, and registry changes, if
any, are saved. Network and Bluetooth connections will need to be re-established.
Tap Start > Run and type WARMBOOT.EXE or WARMBOOT. This command
This process takes less than 15 seconds. Temporary data not saved is lost.
Note: There may be slight delays while the wireless client connects to the network, re-authorization for voice-enabled
applications completes, Wavelink Avalanche management of the HX2 startup completes, or Bluetooth relationships
establish or re-establish.

Cold Boot

Start > Run
The Cold Boot function reboots the device, erases all registry data, and user-specified settings. The factory default settings are
restored when the HX2 powers on again.
Tap Start > Run and type COLDBOOT.EXE or COLDBOOT. This command is not case-sensitive. Tap the OK button.
Note: Because of the extreme nature of cold boot, use this command only as an emergency (or when instructed to do so as
part of a specific HX2 procedure).

HX2 Help

Can't change the date/time or
adjust the volume.
Touch screen is not accepting
stylus taps or needs
recalibration.
HX2 seems to lockup as soon
as it is warm booted.
New HX2 main batteries don't
last more than a few hours.
Keep losing ActiveSync
connection between my host
computer and the HX2.
1
The text typed in the text box can be upper or lower case or a combination of upper and lower case letters.
AppLock is installed and may be running in User Mode on the HX2. AppLock user mode
restricts access to the control panels.
Press <Ctrl>+<Esc> to force the Start Menu to appear. Use the tab, backtab and arrow
keys to move the cursor from element to element.
There may be slight delays while the wireless client connects to the network, authorization
for voice-enabled applications complete, and Bluetooth relationships establish or re-
establish. When the desktop appears or an application begins, the HX2 is ready for use.
New batteries must be fully charged prior to first use. Li-Ion batteries (like all batteries)
gradually lose their capacity over time (in a linear fashion) and never just stop working. This
is important to remember – the HX2 is always 'on' even when in the Suspend state and
draws a small amount of battery power at all times.
When the HX2 enters Suspend Mode, all connections are closed to save battery power.
When the HX2 wakes up, if ActiveSync connection does not automatically re-establish,
disconnect the cable, wait 1-2 seconds and reconnect the cable.
1
is not case-sensitive. Tap the OK button.
1-13