Barcode Tab - Honeywell HX2 Reference Manual

Barcode Tab

Start > Settings > Control Panel > Scanner > Barcode tab
The Barcode tab contains several options to control bar code processing. Options include:
Defining custom Code IDs
l
Disable processing of specified bar code symbologies
l
Rejecting bar code data that is too short or too long
l
Stripping characters including Code ID, leading or trailing characters and specified bar code data strings
l
Replacing control characters
l
Adding a prefix and a suffix.
l
When Continuous Scan Mode is enabled, set the Timeout between same symbol to a value sufficient to prevent the
l
beeper from continuously beeping when a symbol is left in the scanner's field of view.
Notes:
The Scanner application (Wedge) can only enable or disable bar code processing inside the Wedge software.
l
The Scanner application enables or disables the Code ID that may be scanned.
l
Enabling or disabling a specific bar code symbology is done manually using the configuration bar code in the Integrated
l
Scanner Programming Guide.
Choose an option in the Enable Code ID drop-down box: None, AIM ID, Symbol ID, or Custom ID.
4-131