Enabler Uninstall Process; Stop The Enabler Service - Honeywell HX2 Reference Manual

Enabler Uninstall Process

To remove the Avalanche Enabler from the HX2:
Delete the Avalanche folder located in the \System directory.
l
Warm boot the HX2.
l
The Avalanche folder cannot be deleted while the Enabler is running. See
If sharing errors occur while attempting to delete the Avalanche folder, warm boot the HX2, immediately delete the Avalanche
folder, and then perform another warm boot.

Stop the Enabler Service

To stop the Enabler from monitoring for updates from the Mobility Center Console:
1. Open the Enabler Settings Panels by tapping the Enabler icon on the HX2 desktop.
2. Select File > Settings.
3. Select the Startup/Shutdown tab.
4. Select the Do not monitor or launch Enabler parameter to prevent automatic monitoring upon startup.
5. Select Stop Monitoring for an immediate shutdown of all Enabler update functionality upon exiting the user interface.
6. Click the OK button to save the changes.
7. Reboot the HX2 if necessary.
5-2
Stop the Enabler Service.