Chapter 7: Keymaps; Alpha Mode 3 Tap - Honeywell HX2 Reference Manual

Chapter 7: Keymaps

Alpha Mode 3 Tap

Dual Alpha
Triple Tap
Alpha Mode 3 Tap
Hints
When using a sequence of keys that require an alpha key, first press the Alpha key.
l
Double tap the Alpha key for upper case alphabetic characters.
l
Single tap the Alpha key to enter and exit Alpha mode.
l
Default Alpha mode produces lower case alphabetic characters when numeric keys are pressed.
l
Pressing the Alpha key forces "Alpha" mode for all keys.
l
To create a combination of numbers and letters before pressing Enter, remember to tap the Alpha key to toggle between
l
Alpha and Numeric mode.
Use the Input Panel to enter characters that are not available using the 23-key keypad.
l
When using a sequence of keys that do not include the Alpha key (Orange) but does include a sticky key (Blue), press
l
the Blue key first then the rest of the key sequence.
To get this Key / Function
Power / Suspend
Volume Up
Volume Down
Blue Mode (Toggle)
Alpha Mode (Toggle)
Diamond Key
The HX2 default keypad on all HX2s shipped prior to September 2007. Setup requires no user inter-
action.
Set as the default keypad when the Dual Alpha or Triple Tap keypad has been shipped.
Requires file activation to setup the Triple Tap keypad for daily use. Setup requires the Use Triple
Tap Keypad checkbox be checked in the HX2 Options Control Panel. Tap OK.
Power
Blue
Blue
Blue
Alpha
Blue
Press these Keys in this Order
Up Arrow
Down Arrow
Enter
7-1