Reboot; Warm Boot; Cold Boot - Honeywell HX2 User Manual

Microsoft windows ce 5 operating system

Hide thumbs Also See for HX2:

Table of Contents

Reboot

When the Windows desktop is displayed or an application begins, the power up (or reboot) sequence is complete.

Start | Run

A warm boot function does not affect the operating system, but data and programs in RAM are cleared, and registry changes, if

any, are saved. Network, ActiveSync and Bluetooth connections will need to be re-established.

Tap Start | Run and type WARMBOOT.EXE or WARMBOOT. This command is not case sensitive. Tap the OK button. This

process takes less than 15 seconds. Temporary data not saved is lost.

Note:

There may be slight delays while the wireless client connects to the network, re-authorization for

voice-enabled applications completes, Wavelink Avalanche management of the HX2 startup

completes, or Bluetooth relationships establish or re-establish.

Start | Run

The Cold Boot function reboots the device, erases all registry data, and user-specified settings. The factory default settings are

restored when the HX2 powers on again.

Tap Start | Run and type COLDBOOT.EXE or COLDBOOT. This command

Note:

Because of the extreme nature of cold boot, Honeywell recommends using this command only as an

emergency (or when instructed to do so as part of a specific HX2 procedure).

The text typed in the text box can be upper or lower case or a combination of upper and lower case letters.

2-22

is not case-sensitive

. Tap the OK button.

Table of Contents