Honda 1995 Civic Coupe Online Reference Owner's Manual page 39

Steering Wheel Controls
3. Press and hold the SET/decel
button on the steering wheel
until the CRUISE CONTROL
light on the instrument panel
comes on. This shows the
system is now activated.
RESUME/
accel
SET/
decel
The set speed may vary
slightly, particularly on hills.
Instruments and Controls
Changing the Set Speed
You can increase the set cruising
speed in either of two ways:
Press and hold the
RESUME/accel button. The car
will accelerate slowly. When
you reach the desired cruising
speed, release the button.
Push on the accelerator pedal.
Accelerate to the desired
cruising speed and press the
SET/decel button.
You can decrease the set
cruising speed in either of two
ways:
Press and hold the SET/decel
button. The car will
decelerate. Release the button
when you reach the desired
speed.
Tap the brake or clutch pedal
lightly with your foot. The
CRUISE CONTROL light on the
instrument panel will go out.
When the car slows to the
desired speed, press the
SET/decel button. The car will
then maintain the desired
speed.
Even with the cruise control
turned on, you can still use the
accelerator pedal to speed up for
passing. After completing the
pass, take your foot off the
accelerator pedal. The car will
return to the set cruising speed.
Resting your foot on the brake or
clutch pedal will cause the cruise
control to cancel.