Honda 1995 Civic Coupe Online Reference Owner's Manual page 130

4. Try the taillights and back-up
lights to verify which bulb
needs replacing. Remove that
bulb from the socket by
pushing it in slightly and
turning it counterclockwise.
5. Install the new bulb in the
socket. Test it to make sure it
works.
6. Reinstall the bulb holder
assembly. Install the two
screws and tighten them
securely.
High-Mount Brake Light
1. Open the trunk and remove
the socket from the light
assembly by turning it
one-quarter turn
counterclockwise.
2. Remove the bulb by turning
it one-quarter turn counter-
clockwise.
3. Install the new bulb and
reinstall the socket. Make
sure the new bulb is working.
Replacing a Rear
License Bulb
1. Remove the two screws and
remove the lens.
2. Pull the bulb straight out of
its socket. Push the new bulb
in until it bottoms in the
socket.
3. Turn on the parking lights
and check that the new bulb
is working.
Maintenance
Lights