Honda 1995 Civic Coupe Online Reference Owner's Manual page 127

Lights
Turn signals
Back-up lights
Hazard light function
License plate light
Side marker lights
Daytime running lights
(Canada cars)
If you find any bulbs are burned
out, replace them as soon as
possible. Refer to the chart on
page 167 to determine what type
of replacement bulb is needed.
Replacing a Headlight Bulb
Your car has halogen headlight
bulbs, one on each side. When
replacing a bulb, handle it by its
steel base, and protect the glass
from contact with your skin or
hard objects. If you touch the
glass, clean it with denatured
alcohol and a clean cloth.
Maintenance
NOTICE
Halogen headlight bulbs get very
hot when lit. Oil, perspiration, or
a scratch on the glass can cause
the bulb to overheat and shatter.
1. Open the hood. If you need to
change the headlight bulb on
the passenger's side, remove
the air intake tube by pulling
it straight up.
BULB
2. Remove the electrical
connector from the bulb by
squeezing the connector to
unlock the tab on each side.
Pull the connector straight
back.
3. Remove the rubber weather
seal by pulling on the tab.
4. Unclip the end of the
hold-down wire from its slot.
Pivot it out of the way, and
remove the bulb.
5. Insert the new bulb into the
hole, making sure the tabs
are in their slots. Pivot the
hold-down wire back in place,
and clip the end into the slot.
6. Push the rubber weather seal
over the bulb. Make sure the
tab is on the top.
7. Push the electrical connector
onto the tabs of the new
bulb. Turn on the headlights
to test the new bulb.