Honda 1995 Civic Coupe Online Reference Owner's Manual page 105

Engine Oil
equipment, you should have this
maintenance done by a skilled
mechanic.
1. Run the engine until it
reaches normal operating
temperature; then shut it off.
2. Open the hood and remove
the oil fill cap. Remove the oil
drain bolt and washer from
the bottom of the engine.
Drain the oil into an
appropriate container.
OIL DRAIN BOLT
AND WASHER
Maintenance
3. Remove the oil filter and let
the remaining oil drain. A
special wrench (available
from your Honda dealer) is
required to remove the filter.
OIL FILTER WRENCH
OIL FILTER
4. Install a new oil filter
according to the instructions
that come with it.
5. Put a new washer on the
drain bolt; then reinstall the
drain bolt. Tighten it to 40
N.m (4.0 kg-m, 29 Ib-ft).
6. Refill the engine with the
recommended oil. Engine oil
capacity (including filter):
3.5 U.S. qt (2.9 Imp. q t , 3.3 ).
7. Replace the oil fill cap. Start
the engine. The indicator light
should go out within five
seconds. If it does not, turn
off the engine and inspect
your work.
8. Let the engine run for several
minutes and check for leaks
at the drain bolt and washer
and at the oil filter.
9. Turn off the engine, let it sit
for several minutes, and then
check the oil level. If
necessary, add oil to bring
the level to the upper mark
on the dipstick.