Honda 1995 Civic Coupe Online Reference Owner's Manual page 34

Headlights
The rotating switch on the left
lever controls the lights. Turning
this switch to the first position
" " turns on the parking lights,
tail lights, instrument panel
lights, side-marker lights, and
rear license plate lights. Turning
the switch to the second
position " " turns on the
headlights.
To change between low beams
and high beams, pull the turn
signal lever toward you until you
hear a click, then let go. The high
beam indicator will light (see
page 30).
To flash the high beams, pull
back and hold the turn signal
lever. Release the lever, and the
high beams will go off.
Controls Near the Steering Wheel
The high beams will stay on for
as long as you hold the lever, no
matter what position the
headlight switch is in.
Daytime Running Lights
Canadian Models
With the headlight switch off,
the high beam headlights come
on with reduced brightness
when you turn the ignition
switch to ON (II) and release
the parking brake. They remain
on until you turn the ignition
off, even if you set the parking
brake.
The headlights revert to normal
operation when you turn them
on with the switch.
Instruments and Controls