Toshiba e-STUDIO2500c Service Manual page 357

[A-14] Fuser belt front thermistor (THM3)
(1) Take off the front side cover, pressure roller
cover and transport guide.
P.15-18 "[A-2] Front side cover"
P.15-18 "[A-4] Pressure roller cover"
P.15-19 "[A-5] Transport guide"
(2) Release the harness out of clamps, and then
disconnect the relay connector.
(3) Remove 1 screw and take off the fuser belt
front thermistor bracket.
(4) Remove 1 screw and take off the fuser belt
front thermistor.
May 2006 © TOSHIBA TEC
Relay connector
Fig. 15-53
Fig. 15-54
Fig. 15-55
e-STUDIO2500c/3500c/3510c FUSER UNIT / PAPER EXIT SECTION
15 - 33
Fuser belt
front thermistor bracket
Fuser belt front
thermistor
15