Toshiba e-STUDIO2500c Service Manual page 227

(4) Remove the clip on the rear side of the regis-
tration roller (metal). Then remove the gear
and parallel pin.
Note:
Be sure not to drop the parallel pin.
(5) Remove 2 screws, and then take off the duct.
(6) Remove 1 screw, and then take off the cover.
May 2006 © TOSHIBA TEC
Pin
Gear
Clip
Fig. 10-77
Fig. 10-78
Cover
Fig. 10-79
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
10 - 39
Duct
10