Disassembly And Replacement - Toshiba e-STUDIO2500c Service Manual

10.6 Disassembly and Replacement

[A] Bypass unit
[A-1] Bypass unit
(1) Take off the right front hinge cover.
P.2-33 "[N] Right front hinge cover"
(2) Take off the right rear hinge cover.
P.2-32 "[L] Right rear hinge cover"
(3) Remove 1 screw of ground wires. Discon-
nect 1 connector and release the harnesses
from 1 harness clamps.
(4) Remove 1 screw and take off the bypass
feed rear cover.
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
Ground wire
Bypass feed rear cover
10 - 14
Connector
Fig. 10-9
Fig. 10-10
May 2006 © TOSHIBA TEC