Toshiba e-STUDIO2500c Service Manual page 155

Note:
When installing carriage-1, fix the bracket
temporarily at the position (A). Then move it
to the direction (B), push it to the end and fix
securely.
[H] Inverter board (INV)
(1) Take off the carriage-1.
P.6-24 "[G] Carriage-1"
(2) Disconnect 2 connectors. Remove 2 screws
and take off the inverter board.
[I] Carriage wire / carriage-2
(1) Take off the carriage-1.
P.6-24 "[G] Carriage-1"
(2) Attach the wire holder jigs to the pulleys to
prevent the wires from loosening.
Note:
Refer to "3.12 Adjustment of the Scanner
Section" in the Service Handbook for the
direction of the wire holder jigs.
May 2006 © TOSHIBA TEC
Fig. 6-36
Fig. 6-37
Fig. 6-38
e-STUDIO2500c/3500c/3510c SCANNER
6 - 25
( A )
( B )
( A )
Inverter board
6