Toshiba e-STUDIO2500c Service Manual page 278

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO2500c:

Table of Contents

Release the 3 latches and take off the gear

When installing the mixer, match the posi-

tions of the idler gear shaft and the hole of

the gear holder.

Remove 1 clip and take off the bushing and

Remove 1 clip and take off the gear.

Release the 1 latch and take off the gear.

Front side: Remove 2 clips and take off the 2

bushings and the front bushing holder.

e-STUDIO2500c/3500c/3510c DEVELOPER UNIT

Idler gear shaft

Front bushing holder

E-studio3500c E-studio3510c