Connections
Disconnect the aerial cable from the back of your TV set.
Connect the aerial cable to the ANTENNA IN terminal of your VCR.
Connect the supplied coaxial cable to the RF
OUT terminal of the VCR. Plug the other end into
your TV's ANTENNA IN terminal.
Connecting to a Stereo TV
Stereo sound output is only possible using the AUDIO OUT terminals. Sound from the radio frequency converter (RF OUT) is
l
mono only.
The power cord should not be plugged into the power outlet until the above connectrons have been completed.
l
If TV reception is weak, use a TV signal booster (not supplied)
l
To AUDIO IN R/L
ANTENNA IN
RF OUT
To VIDEO IN
A IN
From RF OUT
I
To VIDEO IN
ANTENNA IN
TV back panel
9