Table of Contents
Advertisement
This VCR has the G-CODE Programming System. By simply inputting the G-CODE number with the O-9 numeric
buttons, you can programme your VCR for timer recording.
The G-CODE numbers are listed in most newspaper, TV guide, and local cable TV listings.
The timer can be set for automatic recording of up to 8 events over a 365 day period. In addition, each of the
events can be set to be recorded on a daily or weekly basis up to the limit of the tape.
PREPARATION:
Select the video channel on your TV. Turn on the VCR. (See page 5, item 3.)
l
Load ihe cassette, ensuring the erasure protection hole is covered. The VCR power will automatically turn on
l
Check that the clock is displaying the correct time.
l
26
CODE number, refer to your newspaper or TV guide.
ODE to directly select this screen.
To record every day at the same time.
"WEEKLY":
To record every week at the same time.
hannel is set into.
numeric or A/v.
Continued on next page
Advertisement
Table of Contents
