Setting The Channels - Sharp VC-H670X Operation Manual

Setting the Channels

Your VCR can receive VHF channels 0 to 12, and UHF channels 28 to 69. Your VCR has 48 programmable
channel positions, each of which can be set to any of the above broadcast channels. The channel positions have
been preset at the factory as shown below.
2
3
4
7
AUTO TUNING
PREPARATION
Select the video channel on your TV. And turn on the VCR. (See page 5, item 3.)
l
PLEASE w*1+.
If additional unwanted channels were found, refer to page 15 to skip unwanted channels.
l
If some channels were unable to be found, refer to page 14 for Manual Tunrng.
l
l
l
l
28
47
CHANNEL PRESET has been preset to MANUAL at the
l
factory.
SET
through all of the channels and when finished, the TV
screen will return to the normal screen.
Normal
The bar display indicates the estimated amount of
Screen
channels tuned.
Use the A / V I 4 / F buttons on the remote control to set
the OSD.
Channel position numbers 1, 3, 4, 8, 11 to 27, and 29 to 46
have been factory set to be skipped when CHANNEL A
or V (CH A or V)IS used.
If the picture is not clear, if you want a different channel
from the one preset or if you wish to reset a skipped
channel, reset the channel as follows.
13