Honeywell Tuxedo Touch Series User Manual page 40

SCAN SECURITY
Add a Trigger
In the "Trigger" box, press the Add icon.
Press the TIME button and Set the occurrence to Repeated, or Once. If "Repeated" was selected, choose the desired days of the
week; or "Enter Date" for an occurrence that happens Once.
Press the SECURITY button and select a security mode: DISARM, AWAY, STAY, NIGHT (for residential panels only).
Press the THERMOSTAT button to select the Thermostat Devices from the drop down menu. Use the ABOVE and BELOW
button to enter a set point temperature value or press the Temperature Value box and enter 2 digits for the desired
temperature. Note: Test thermostats first to ensure proper function in the "Scene" feature.
Press the DOOR button to select a Door Device from the drop-down menu (see notes below). Select LOCKED, UNLOCKED or
CODE UNLOCKED. Press Save.
Add an Action
In the "Action" box, press the Add icon.
Press the SECURITY button and select a security mode: DISARM, AWAY, STAY, NIGHT (for residential panels only). Enter
User Code, if required.
Press the LIGHT button and select a Light Device from the drop down menu; set the action to ON or OFF.
Press the THERMOSTAT button and select a Thermostat Device from the drop-down menu. Press the Set Mode button to set
the Action to "Off", "Heat", or "Cool". Press the Set Energy button and select from "Normal" or "Saving" energy mode. Press the
Set Point button and enter a set point value for "Heat Point" and "Cool Point". Note: Test thermostats first to ensure proper
function in the Scene feature.
Press the DOOR button and select a Door Device from the drop-down menu (see notes below). Set the action to LOCKS or
UNLOCKS. Press Save.
Add a Condition
In the "Condition" box, press the Add icon.
Set the TIME: Set the occurrence to Repeated, or Once. Follow the screen instructions to select the days of the week if
"Repeated" was selected or "Enter Date" for an occurrence that happens Once.
Press the SECURITY button and select a security mode: DISARM, AWAY, STAY, NIGHT (for residential panels only).
Press the THERMOSTAT button and select a Thermostat Device from the drop down menu. Use the ABOVE and BELOW
buttons to enter a set point temperature value or press the Temperature Value box and enter 2 digits for the desired
temperature. Note: Test thermostats first to ensure proper function in the Scene feature.
Press the DOOR button and select a Door Device from the drop-down menu (see notes below). Select LOCKED or UNLOCKED.
Press Save.
Notes:
1. Motorized door lock bolts physically lock and unlock the door when activated, but if the door lock installed is a non-motorized
type, activation allows the door to be manually unlocked without a key. See "Compatible Devices" section for further information.
2. Some thermostats do not update temperature status automatically (i.e., Wayne Dalton).
3. When using a Kwikset Smartcode Electronic Deadbolt door lock (in a Scene that is programmed to trigger when unlocked) the
Scene does not trigger if using a key; enter a user code.
Automation (cont'd)
40