Honeywell Tuxedo Touch Series User Manual page 35

SCAN SECURITY
Include a Door Lock
Assemble the Z-Wave door lock (if required); install batteries and connect necessary cables (refer to the Door Lock's Instruction
Guide). Enroll the door lock adjacent to the keypad and mount within the proper Z-Wave range, refer to the section entitled
"Important Notes" for further information.
NOTE: Program the user code in the control panel prior to programming that user code into the door lock. User Codes must be
4-digits.
Include a door lock device as follows:
ICON
1. At the Tuxedo Touch keypad:
a) Press the Automation icon From the
"Home" screen and then press the Z-
Wave Setup icon to display the "Z-Wave
Device Management" screen.
b) Press the Z-Wave Include/Add icon.
2. At the Door Lock:
a) Program the selected user code from the
panel; refer to Door Lock User Guide.
Include a Honeywell Thermostat
Install Honeywell Thermostat according to the manufactures instructions. Device should be mounted in the final location and
tested before adding it to the system.
Note: Honeywell is not responsible for property damages due to improper setting of the thermostat modes.
To include a Honeywell Thermostat into a Z-Wave network, do the following:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the
"Home" screen and then press the
Z-Wave Setup icon to display the
"Z-Wave Device Management" screen.
b) Press the Z-Wave Include/Add icon.
Automation (cont'd)
ACTION
ACTION
Note: If installing another brand of thermostat, follow the instructions in the
Users Guide for that specific thermostat to include properly into the Z-Wave
network.
Note: Some thermostats do not update temperature status automatically i.e.,
Wayne Dalton.
The keypad displays a series of messages:
NOTES
Note: Door lock devices may vary; follow the instructions in the Users Guide
for your specific door lock to include properly and to program a new user
code.
The keypad displays a series of messages:
"Please press function key on device"
"Adding to Security Network"
"Device added successfully"
Follow the screen instructions to complete the inclusion.
Note: If software is upgraded on the Tuxedo Touch keypad, re-include the
door lock and re-set the user code in the door lock.
NOTES
"Please press function key on device"
35