Honeywell Tuxedo Touch Series User Manual page 31

SCAN SECURITY
Note: Use care when providing the "Yes" or "No" response. Pressing the screen outside the prescribed area may cause the
background to come to the front. If this occurs, the Yes/No message that disappeared times-out in 30 seconds even though it is
not visible. Then the keypad resets into the Normal Mode (or Safe Mode if this is the third time that the warning message
appeared).
Note that this is a limited mode of operation. While in this mode:
• You can use the Security icon to access the Console Emulation Mode of operation to try to clear your faults, disarm the system,
or enter additional Alpha Keypad commands specified in your panel User Guide. You can perform almost all functions that you
can perform from a standard non-graphic alpha keypad.
• You can press the "Panic" key and generate Emergency Messages as defined in the panel's home partition for this keypad.
• The Armed and Ready LEDs on the front of the keypad indicates the keypad's home partition status. The Message LED (on
models with Voice feature) or Trouble LED (on models without Voice feature) is not active in the Safe Mode.
• The Chime mode functions in the Safe Mode.
• When an alarm occurs in the Safe Mode, it is displayed on the Console mode screen only and is not shown on the Home screen.
• Z-Wave Scenes do not function in Safe Mode.
User Setup (cont'd)
31