How To Edit A User; Safe Mode - Honeywell Tuxedo Touch Series User Manual

SCAN SECURITY

How to Edit a User

Note: You cannot edit a User's name or number. To modify a User name or number, you must delete the User and re-enter User.
Edit a user as follows:
ICON
1. Press the EDIT USER icon.
2. Enter your Authorized code.
3. Select the options needed for this user
and press the Save icon.

Safe Mode

The Safe Mode may be automatically entered by the program on a communication failure or may be entered manually on
command.
To Exit the Safe Mode:
1. Press the ! SAFE MODE ! bar.
2. Select "Yes" to return to the Normal Mode of operation. The keypad resets and normal operation returns as long as the original
conditions that caused the entry into Safe Mode do not still exist.
ICON
1. Select Safe Mode and then press Apply.
! SAFE MODE !
2. Press the OK icon.
3. To exit, press the safe mode bar and press
Yes to return to Normal Mode.
In the rare event that the keypad cannot successfully communicate in its graphic mode with the control panel, the Safe Mode is a
backup mode that ensures that you can communicate with your system.
In this mode, the keypad operates much like a standard non-graphic keypad so that you can control your system until the
problem is corrected.
If this situation occurs, the keypad presents you with a message of "Problems detected. Start Keypad in Safe Mode?" and requests
a "Yes" or "No" response. If you answer with "Yes", the keypad enters into the Safe Mode. If you answer with "No", the keypad
tries to communicate with the panel again. After 3 consecutive times of receiving no response, the keypad enters the Safe Mode
automatically.
User Setup (cont'd)
ACTION
Three selections are available: add a user, edit a user, or delete a user.
When you select Save, the configuration changes are saved and you are
returned to the User Setup screen.
Note: The authorized code for deleting, adding, and editing users is
dependent upon the alarm panel you are interfacing with. Check your alarm
panel Installation and Setup Guide to determine who can delete, add, and edit
users.
ACTION
NOTES
NOTES
While in the Safe Mode, the Home screen displays the Security, Panic, and
Message Icons. A message !SAFE MODE! is displayed at the lower left
side of the screen.
The keypad resets and restarts in the Safe Mode.
30