Ars Leading Digit Entry For Plans 1 Through 8 - Panasonic KX-TD816 Installation Manual

314-321 4.5
TRS / ARS Programming
ARS Leading Digit Entry for Plans 1 through 8
Description
By entering numbers into each leading digit plan (programs below)
you are starting the process to determine which CO line group will
be used to route the call.
Program: [314] [315] [316] [317] [318] [319] [320] [321]
Plan: 1 2 3 4 5 6 7 8
These eight plans are used to analyze the number which the user
dials and to decide the route plan for the call. If the user-dialed
number is registered in plan 1, then Routing Plan 1 is selected for
the call. ARS Leading Digit Entry for Plans 1 through 8 match
ARS Routing Plans 1 through 8 (programs [322] through [329])
respectively.
Selection
Default
All locations - Not stored
Programming
1.
Enter a program address (314 through 321).
Display example: ARS Leading PL-1
Press NEXT.
Display: Location NO?->
Enter a location number.
To
enter location number 01, you can also press NEXT.
Display example: 0l:Not Stored
Enter a leading digit number.
To
delete the current entry, press CLEAR.
To
change the current entry, press CLEAR and the new number.
Press STORE.
l
Location number: 01 through 100
l
Leading digit number: 10 digits (max.)
2.
3.
4.
5.
6.
7.
8.
To program another location, press NEXT or PREV, or
SELECT and the desired location number.
Repeat steps 4 through 6.
._
Press END.
Conditions
There is a
maximum
of 100 leading digit numbers for each plan. Each
number has a maximum of ten digits, consisting of 0 through 9, and *
I
The character " * " can be used as a wild card character.
Feature References
Section 3, Features,
Automatic Route Selection (ARS)
4-72 System Programming