Led Indication, Intercom - Panasonic KX-TD816 Installation Manual

L
3
Features
Conditions
l
Red slow
flash indication appears
on
the S-CO button only.
l
The indication of Pricacl, Release appears on the S-CO hurton only.
Programming References
Section 1, System Programming,
[OO_Sj
Flexible CO Button Assignment
Station Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Manual.
Flexible Button Assignment - Group-CO (G-CO) Button. Loop-CO (L-
COjButton. Single-CO (S-CO) Button
Feature References
Section
3,
Features,
Button. Group-CO (G-CO)
Button. Loop-CO (L-CO)
Button. Single-CO (S-CO)
Operation References
Not applicable.
LED Indication, Intercom
Description The LED (Light Emitting Diode) indicator of the INTERCOM
button indicates the line condition with a variety of lighting
patterns. This allows the user to see the current state of the
intercom line. The table below shows the lighting patterns and the
intercom line conditions.
INTERCOM Button
Off
Intercom Status
Idle
Green On
Green slow tlash
Green moderate flash
Intercom call / Conference established
Intercom call hold
Intercom call exclusive hold /
Consultation hold
Green rapid flash
Incoming intercom / doorphone call
Conditions
None
Programming References
No programming required.
Feature References
Section 3, Features,
Busy Lamp Field
Operation References
Not applicable.
3-76 Features