Print Reports - Samsung CLX-8640 series Service Manual

Color laser mfp
Table of Contents

Advertisement

4.5.3.6. Print Reports

Information > Print Reports
This menu displays reports which that can be printed from the system. The following reports will be available to print.
-
Supplies Information
-
Fax Protocol Dump List
-
Auto Color Registration Result
-
Maintenance
-
Job Duty
-
TRC Control History
-
OPC ACR Report
-
Usage Counter Report
-
Error Information Report
-
Diagnostics Page Report
Auto Color Registration Result
Information > Print Reports > Auto Color Registration Result
This report lists last 10 Auto Color Registration results.
If there is color registration problem , and execution of Auto Color Registration does not solve the problem, service
engineers can print out this report and check "Succeeded or Failed for ACR" field.
Result
0
100
200
301
302
304
308
316
e.g.) 323
480
TRC Control History
Information > Print Reports > TRC Control History
NOTE
TRC means "Tone Reproduction Curve".
This report shows history of execution of TRC control. TRC control preserves color consistency against changes in
supplies resulting from long-time use and environmental change. The purpose of the history report is to check if TRC
control works normally.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
Meaning
Success
Sensor LED calibration failure
Pattern storage failure in register
Out of normal range in rear pattern width
Out of normal range in front pattern width
Out of normal range in center pattern width
Number of sensed pattern is lager than normal number (check ITB scratch)
Number of sensed pattern is smaller than normal number
Multiple errors. For example 301, 302, 304, 316 error occur at the same time. In that case, the
sum of last two digit appears as result
Corrected value exceeds the limit of correction
4. Troubleshooting
4-40

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clx-8640ndClx-8650 seriesClx-8650nd

Table of Contents