Interrupt Button - Samsung CLX-8640 series Service Manual

4. Troubleshooting
-
Held : Proof Copy : In the copy mode, the job is temporarily stopped when the proof copy was selected. You can
release the job pressing Release.
-
Held : User Request : The job is temporarily stopped when Job Hold was pressed. You can release the job
pressing Release.
-
Held : Delayed Print : The job is temporarily stopped until the time you set for the delay print job which is sent
from a computer.
-
Held : Needs Resources : The job is temporarily stopped when the machine has problem such as paper empty,
paper mismatch, etc.
-
Interrupted : The job is temporarily stopped when the (Interrupt) button was pressed for an urgent copy job.
-
Paused : The job is paused when the (Stop) button was pressed or the machine fault.
-
Completed : The job is completed.
-
Completed with error : The job is completed with error.
-
Deleted : If you select a job in the list and press Delete, the job is deleted.

Interrupt button

When you press (Interrupt), the machine goes into interrupt mode, which means it stops the current printing job for an urgent
copy job. When the urgent copy job completed, the previous printing job continues.
NOTE
When you select the staple feature for a printing job, interrupt mode works after a stapling completed in the printing job.
Status
Off
Green
4-5
On
Description
The machine is not in interrupt printing mode.
The machine is in interrupt printing mode.
Copyright© 1995-2013 SAMSUNG. All rights reserved.