Temperature Sensor; Itb Waste Auger Drive Unit - Samsung CLX-8640 series Service Manual

3.3.4. Temperature Sensor

1. Remove the left cover. (Refer to 3.3.1)
2. Remove the sensor after unplugging the connector.

3.3.5. ITB Waste Auger Drive Unit

1. Remove the left cover. (Refer to 3.3.1)
2. Remove 3 screws. Remove the HVPS board1 with
its holder. Unplug the connector from the ITB Waste
Auger Drive Unit..
Copyright© 1995-2013 SAMSUNG. All rights reserved.
3. Open the front cover. Remove 3 screws. And remove
the ITB Waste Auger Drive Unit.
3. Disassembly and Reassembly
3-17