Sony BVP-900 Series Product Information Manual page 93

DETAIL GATE: Skin tone detail gate function. When this
button is illuminated, the adjustment range of
the skin tone detail is displayed in white on the
monitor screen.
SATURATION: Saturation function.
CONTRAST: Contrast function.
BLACK GAMMA: Black gamma function.
CHARACTER: Self-diagnostic display function. When this
button is illuminated, details of the CCU-
700A/700AP diagnosis are displayed on the
monitor connected to the CHARACTER
OUTPUT connector of the CCU-700A/700AP.
This information is also mixed with the video
signal output from the PIX1 OUTPUT connector.
Each time you press this button, the status
changes as follows.
Off ON (page 1) ON (page2)
The contents of the self-diagnosis can be displayed as required, even
if this button is not illuminated.
6) Paint control block
KNEE POINT KNEE SLOPE
SATURATION CONTRAST
SKIN DETAIL SKIN PHASE SKIN WIDTH
R GAMMA M GAMMA B GAMMA
R FLARE G FLARE B FLARE
DTL LEVEL DTL LIMITER BLK LIMITER
a
(a) Paint controls (rotary encoders) and LED level markers
Adjust the items selected with the paint item select buttons
The LED level markers illuminate to indicate the adjusted value of
the respective items. A marker to which an item is not assigned is
not illuminated.
(b) CLEAR button
Press and hold for more than one second to clear the manually
adjusted settings of the selected items and continue with the
standard settings (which can be defined by the user).
(c) Paint item select buttons and indicators
Press either the (up) and (down) button to illuminate the green
indicator corresponding to the paint items to be adjusted. The names
of the selected items are illuminated in yellow and can be adjusted
using the respective paint controls (rotary encoders).
KNEE POINT/KNEE SLOPE: To adjust the knee point and
knee slope using the left two controls.
SATURATION/CONTRAST: To adjust the saturation and
contrast using the left two controls.
SKIN DETAIL/SKIN PHASE/SKIN WIDTH/SKIN SAT: To
adjust the detail level, phase, bandwidth and saturation of
the skin tone, respectively using the four controls.
R GAMMA/G GAMMA/B GAMMA: To adjust the gamma
balance with the left three controls.
R FLARE/B FLARE/G FLARE: To adjust the flare balance
... ON (page n)
b
CLEAR
SKIN SAT
BLK GAMMA
c
DTL CRISP
d
PAINT
LOCK
and .
Location and Function of Parts and Controls
with the left three controls.
DTL LEVEL/DTL LIMITER/BLK LIMITER/DTL CRISP: To
adjust the detail level, detail limiter level, black limiter
level and detail crisp level, using the four controls
respectively.
Note When the corresponding paint function is not active, the item name is
not illuminated in yellow and the item cannot be controlled from this panel.
(d) PAINT LOCK button
Press and illuminated the button to disable paint control from this
panel. While this button is illuminated, only item switching with the
paint item select buttons and
7) Scene file control block (left)
Monitor select block (right)
a
1 2 3 4 5
SCENE FILES
STORE
(a) SCENE FILES buttons
While the STORE button is flashing: When you press one of
these buttons, the current setting data is stored as a file
with the corresponding number.
When the STORE button is not illuminated: The stored data
can be retrieved by pressing and illuminating the button
corresponding to the required file number. Press the
button to turn the illumination off and continue with the
previous status.
(b) STORE button
To store a scene file, first press this button so that the button starts
flashing, then press the SCENE FILES button with the desired
number. When file registration is complete, the STORE button is no
longer illuminated. To cancel the registration, press the flashing
button again before pressing the SCENE FLIES button. The STORE
button illumination is turned off.
(c) MONITOR SELECT buttons
Press to select the output signal from the PIX1 and WF1 OUTPUT
connectors of the CCU-700A/700AP. The signal corresponding to the
illuminated button is output.
R/G/B: Select the R signal, G signal or B signal. The signals can
be selected either independently or in combination and
are output from the PIX1 and WF1 OUTPUT connectors.
When any of these buttons is pressed, the SEQ and ENC
circuits are turned off.
SEQ (sequential): When this button is pressed, the R/G/B
circuits for the WF1 OUTPUT are turned off and the
SEQ signal is output from the WF1 OUTPUT connector.
You can monitor the waveforms of the R, G and B signals
in sequence on a monitor connected to the WF1
OUTPUT connector. The PIX1 OUTPUT connector
continues outputting the same signal as it was before
this button was pressed.
ENC (encode): When this button is pressed, the R/G/B and
SEQ circuits for both the WF1 and PIX1 OUTPUTs are
turned off. The ENC signal is output from both the WF1
and PIX1 OUTPUT connectors.
are enabled.
c
b
R G B
SEQ ENC
MONITOR SELECT
10
92