Sony BVP-900 Series Product Information Manual page 107

(6) Paint control block
SKIN DETAIL
KNEE POINT KNEE SLOPE
R GAMMA M GAMMA
b
(a) CLEAR button
Press and hold for longer than one second to clear the manually
adjusted settings of the selected items and continue with the
standard settings (which can be defined by the user).
(b) Paint controls (rotary encoders) and LED level markers
Adjust the items selected with the paint item select button. The LED
level markers illuminate to indicate the adjusted value of the
respective items. A marker to which no item is assigned does not
illuminate.
(c) Paint item select button and indicators
Press the button to illuminate the green indicator corresponding to
the paint items to be adjusted. The names of the selected items
illuminate in yellow and can be adjusted using the respective paint
controls (rotary encoders).
SKIN DETAIL/SATURATION: Adjust the detail level of the
skin tone with the left control and the saturation with the
right control
KNEE POINT/KNEE SLOPE/KNEE SAT: Adjust the knee
point, knee slope and knee saturation with these three
controls.
R GAMMA/M GAMMA/B GAMMA: Adjust the gamma
balance with these three controls
Note When the corresponding paint function is not active, the yellow
indication of the item name does not illuminate and the item cannot be
controlled from this panel.
(d) PAINT LOCK button
Press and illuminate the button to disable paint control from this
panel. While this button is illuminated, only item switching with the
paint item select button is enabled.
7) Scene file control block
a
1 2 3
SCENE FILES
(a) SCENE FILES buttons
While the STORE button is flashing: When you press one of
these buttons, the current setting data is stored as a file
with the corresponding number.
When the STORE button is not illuminated: The stored data
can be retrieved by pressing and illuminating the button
with the desired number. Press the button to turn the
illumination off and continue with the previous status.
a
SATURATION
KNEE SAT
CLEAR
B GAMMA
PAINT
LOCK
c d
b
4 5
STORE
Location and Function of Parts and Controls
(b) STORE button
To store a scene file, first press this button so that the button starts
flashing, then press the SCENE FILES button with the desired
number. When file registration is completed, the STORE button
illumination is turned off. To cancel the registration, press the
flashing button again before pressing the SCENE FILES button. The
STORE button is not illuminated.
(8) ECS/Shutter control block (left)
Master gain control block (right)
a
ECS
ON
ECS/SHUTTER
b
(a) ECS (Extended Clear Scan) button
Press and illuminate the button to set the camera to ECS mode.
Press again and turn off the illumination to set the camera to Shutter
mode.
(b) ON button
Turns the ECS function on and off (when the ECS button is
illuminated) or the shutter function (when the ECS button is not
illuminated). The function is ON when this button is illuminated.
(c) ECS frequency/shutter speed select buttons and display
window
In ECS mode (when the ECS button is illuminated): The
selected ECS frequency is displayed in the window.
Press to select the desired scan frequency. The
frequency increases when the
and decreases when the
continuously changes while either button remains
pressed.
In Shutter mode (when the ECS button is not illuminated):
The denominator of the selected step shutter speed is
displayed in the window. Press to select the desired
shutter speed. The speed increases when the
button is pressed and decreases when the
button is pressed. It continuously changes when either
button remains pressed.
(d) MASTER GAIN select buttons and display window
Select the appropriate video gain according to the illumination of the
subject to be shot. The selected value (dB) is displayed in the
window. The gain value increases when the
and decreases when the (down) button is pressed. It continuously
changes while either button remains pressed.
(9) Filter control block
a b
ND
ND (ND filter select) display
Indicates the number corresponding to the selected ND filter.
1: Clear
MASTER GAIN
c
d
(up) button is pressed
(down) button is pressed. It
(up)
(down)
(up) button is pressed
c d
CC
106
10