A Total System; System Configuration - Sony BVP-900 Series Product Information Manual

2

A TOTAL SYSTEM

2-1. System Configuration

The BVP-900 Series is based on the renowned BVP-700 Series and
DSP technology pioneered by Sony in the earlier BVP-500 Series
camera system. This new system features two camera heads, the
BVP-900/900P full-size studio model and a full companion portable
camera, the BVP-950/950P. This portable model is designed for full
integration into a BVP-900/900P studio camera system, as well as
CCD UNIT
STUDIO ZOOM LENS
OHB-750A/750AP
OHB-730/730P
4 : 3
16 : 9
OHB-750WSA/750WSAP
OHB-730WS/730WSP
2-inch VF(BVF-20W/20WCE)
1.35-inch COLOR VF(BVF-C10W)
1.5-inch VF(BVF-10/10CE)
CCD UNIT
OHB-750A/750AP
OHB-730/730P
4 : 3
ENG/EFP LENS
COLOR VIDEO CAMERA
16 : 9
BVP-950/950P
OHB-750WSA/750WSAP
OHB-730WS/730WSP
OTHER OPTIONAL ACCESSORIES
For BVP-900/900P STANDALONE UNIT
BKP-7910/7910P
SCRIPT HOLDER
BKP-7911/7912
TRIAX UNIT
BKP-7010
RTS KIT
BKP-7913
*1: TRIAX CABLE LENGTH
Diamater Maximum length
CCU-700 CCU-550
8.5 mm 1000 m 700 m
14.5 mm 2000 m 1400 m
Figure 2-1 System Configuration
ELECTRONIC VIEWFINDER
BVF-77/77CE BVF-7700/7700P
TRIAX CABLE (*1)
COLOR VIDEO CAMERA
BVP-900/900P
PIX 2
WF 2
PIX 2(*4)
ELECTRONIC
WF 2(*4)
VIEWFINDER
BVF-55/55CE
CAMERA ADAPTOR
CA-570/570P
CA-550/1 550P/1
TRIAX CABLE (*1)
For BVP-950/950P ELECTRET CONDENSER MICROPHONE
ECM-MS5
MICROPHONE
C-74
CRADLE SUSPENSION
CRS-3P
For CA-550/550P TELEPROMPTER UNIT
BKP-5971
Diamater Cable-length limitation for
prompter signal transmission
CCU CAM CAM CCU
8.5 mm 500 m 400 m
14.5 mm 1000 m 800 m
being used as a standalone acquisition camera in combination with
Betacam VTRs. Figure 2-2 shows how this interface is provided by
the CA-553 50-pin Camera Adaptor. A variety of key peripherals, such
as the CNU-700 and CNU-500 Camera Command Network Units help
users to easily expand/upgrade their system. These peripherals
provide a perfect interface with the growing ranges of Sony digital
component equipment, such as Betacam SX and Digital BETACAM
products.
REMOTE CONTROL
PANEL
CCA-5 CABLE
RCP-700 RCP-701
(*2)
CCA-5 CABLE
(*2)
CAMERA CONTROL UNIT
CCA-5 CABLE
CCU-700/700P/700A/700AP
(*2)
VIDEO SELECTOR
CCA-5 CABLE
VCS-700
(max. 200m)
PIX
WF
CAMERA CONTROL UNIT
CCU-550/550P(*3) CCU-700/700P/700A/700AP
*2: CCA-5 CABLE LENGTH
CCU-700 CNU-700
RCP-720/721/730
CCU-700 CNU-700
/731/740/741
RCP-720/721/730
CCU-700 CNU-700
/731/740/741
RCP-720/721/730
CCU-700 CNU-700
/731/740/741
*3: When the CA-570/570P is connected with the CCU-550/550P, use of intercom transmission channel is
limited to only one channel.
In this case, use the INCOM 1 connector of the CA-570/570P.
*4: When the CCU is connected with the VCS-700, the PIX 2 and WF 2 connectors of the CCU are normally
used. When the CCU-550/550P is connected, use of PIX and WF transmission channels are limited to only
one channel respectively.
In this case, use the PIX and WF connectors for the CCU-550/550P.
REMOTE CONTROL PANEL
RCP-720 RCP-721 RCP-730 RCP-731 RCP-740 RCP-741
CCA-5 CABLE
(*2)
CAMERA COMMAND
NETWORK UNIT
CNU-700/500
CCA-5 CABLE
MASTER SETUP UNIT
(max. 200m)
MSU-700
CCA-5 CABLE
(*2)
RCP-700/701/720
/721/730/731/740/741
200 m
RCP-700/701
16 0 m
RCP-720/721/730
/731/740/741
90 m
RCP-720/721/730
RCP-700/701
/731/740/741
45 m
1
2
6