High Capacity Input Tray (Hcit) Drawer Slide Assembly Removal; High Capacity Input Tray (Hcit) Tray Lift Drive Motor Assembly Removal - Dell 5535dn Service Manual

High capacity input tray (HCIT) drawer slide assembly removal

The left and right drawer slide assemblies are the same, and only one is in a package. The instructions below
are for removing the left slide; removing the right slide has similar instructions.
1. Remove the HCIT media tray assembly. See "High capacity input tray (HCIT) media tray assembly
removal" on page 4-157.
2. Remove the three screws (A) securing the HCIT drawer slide to the frame of the drawer.
3. Remove the HCIT drawer slide.

High capacity input tray (HCIT) tray lift drive motor assembly removal

Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.
1. Remove the HCIT cover, right. See "High capacity input tray (HCIT) cover, right removal" on
page 4-162.
2. Remove the HCIT cover, left. See "High capacity input tray (HCIT) cover, left removal" on page 4-164.
A
4-167
Repair information