Adf Turn Guide Removal - Dell 5535dn Service Manual

ADF turn guide removal

1. Remove the ADF pinch roll assembly. See "ADF pinch roll assembly removal" on page 4-72.
2. Remove the ADF separator torque limiter assembly. See "ADF separator torque limiter assembly
removal" on page 4-63.
3. Remove the two screws (A) from the front side. Be sure to secure the ground strap by the upper turn guide
screw when reinstalling.
4. Using a flat-blade screwdriver, unfasten the hook securing the separator guide to the turn guide.
Note: Upon reassembly, reattach the hook by pressing with your fingers until it snaps into place.
A
Repair information
4-73