Size Sensing - Dell 5535dn Service Manual

Reports
Menu Settings Page
To print the Menu Settings Page, touch
Printing Menu Settings Page is displayed.
The following settings are printed:
Maintenance Counter Value
Reports
PPDS Emulation
Min Copy Memory
ADF Edge Erase
Disable Scanner
Disk Encryption
Required Standby
Key Repeat Rate
Touch Back to return to the Configuration Menu.
Event Log
The event log provides a history of printer errors. The event log can only be printed in CONFIG MENU.
Additional options are available in DIAGNOSTICS. See "EVENT LOG" on page 3-25.
To print the event log:
1. Touch
2. Touch
3. Touch Back to return to EVENT LOG.
Note: An event log printed from the CONFIG MENU will not contain debug information or secondary codes for
900 service errors. However, the event log printed from DIAGNOSTICS mode does include this information.

SIZE SENSING

This setting controls whether the printer automatically registers the size of paper installed in an input source
with size sensing.
Paper source
Tray 1 (integrated)
Multipurpose feeder
250-sheet drawer
550-sheet drawer
2000-sheet drawer
250-sheet duplex
550-sheet duplex
Envelope feeder
USB Scan to Local
SIZE SENSING
Factory Defaults
NumPad Job Assist
FB Edge Erase
Paper Prompts
Wipe Disk
LES Applications
Wiper Message
to select Event Log from Configuration Menu.
to print the log. Printing EVENT LOG.. displays on the touchscreen.
Size sensing
to select Menu Settings Page from Reports. The message
X
X
X
X
Print Quality Pages
Panel Menu
Energy Conserve
Fax Storage Location
Scanner Manual Registration
Envelope Prompts
Font Sharpening
Key Repeat Initial Delay
Clear Custom Status
Diagnostic aids
3-31