Starter Solenoid Test - Honda Civic Service Manual

et
Starter Solenoid Test
1. Disconnect the S and lvl connectors from the starter
s o l e n o i d .
2. Check the hold-in coil for continuity between the S
terminal and the armature housing (ground). There
should be continuity.
. lf there is continuity, goto step 3.
. lf there is no continuity, replace the solenoid,
3. Check the pull-in coil for continuity betwee n the S
t e r m i n a l a n d M t e r m i n a l . T h e r e s h o u l d b e
continuity,
. lf there is continuity, the solenoid is OK.
. lf there is no continuity, replace the solenoid,
4-7