Verifying The Management Blade Time Settings - Fujitsu Primergy BX900 S2 Upgrade And Maintenance Manual

Basic software procedures
5.2.2

Verifying the management blade time settings

After a management blade has been replaced, you must check the system time
settings.
System unit with one management blade installed
Ê After replacing the management blade, ask the system administrator
whether the RTC or UTC time standard is to be used as system time.
I
If the system time (RTC) is set to UTC, the SEL (System Event Log)
time stamps may differ from the local time.
Ê Enter the management blade web interface, see section
management blade web interface" on page
Ê Select the Settings – System Unit – Date/Time menu.
Ê Under System Time and System Date specify the correct time and date.
I
By default, the system time set in the management blade is RTC
(Real Time Clock) local time. If your IT infrastructure relies on
universally accepted time standards, set the System Time to UTC
(Universal Time, Coordinated) instead. Greenwich Mean Time (GMT)
can be considered equivalent to UTC.
Ê Save your changes and exit the management blade web interface.
System unit with two management blades installed
After replacing the slave management blade, the slave management blade
inherits the time settings from the master management blade. Nevertheless
time settings should be checked.
Ê Enter the management blade web interface.
Ê Select the Settings – System Unit – Date/Time menu.
Ê Under System Time and System Date specify the correct time and date.
Ê Save your changes and exit the management blade web interface.
I
For detailed information on how to access the management blade web
interface and modify settings, refer to the "PRIMERGY BX900 Blade
Server Systems ServerView Management Blade S1 User Interface
Description".
70 Upgrade and Maintenance Manual
"Accessing the
44.
BX900 S2