Accessing The Management Blade Web Interface - Fujitsu Primergy BX900 S2 Upgrade And Maintenance Manual

Basic hardware procedures
4.1.1

Accessing the management blade web interface

For checking the current system status and administration of the system unit,
connect a field service terminal (FST, e.g. notebook) to the management blade
and login to the management blade web interface.
1
Figure 2: Connectors on the management blade
Ê Connect the FST to the service LAN connector (1) of the management
blade. During maintaining working, FST has to be connected with the
connector of Management LAN.
I
– If two management blades are installed, connect the FST to the
master management blade. The status indicator of the master
management blade glows yellow.
– If you need access to server blades or connection blades, ask the
customer for the IP address of the management LAN and connect
the FST to the management LAN connector.
– Customers must use the Up port (4) while the Down port (5) is
reserved for service personnel.
– The FST must be on the same LAN with the same subnet as the
service LAN port or as the management LAN port respectively.
Ê Launch a web browser and enter the Management Agent Administrative URL to
login to the management blade web interface. For further information, refer
to the "PRIMERGY BX900 Blade Server Systems ServerView Management
Blade S1 User Interface Description".
I
If you don't know the Management Agent Administrative URL, proceed
as follows.
44
2 3
Upgrade and Maintenance Manual
4 5
BX900 S2