Ê If applicable, close the rack door as described in section
door" on page
Ê Make sure, that the new connection blade has the same firmware version as
the old one as described in section
firmware" on page
Ê If applicable, migrate the Fibre Channel connection blade license to the new
connection blade. Please follow the instructions provided separately.
Ê Restore the connection blade settings from the backup copy as described in
section
"Restoring connection blade settings" on page
8.3
Double-width connection blades
8.3.1
Installing double-width connection blades
Upgrade and Repair Units (URU)
average hardware task duration: 5 minutes
average software task duration: 10 minutes
8.3.1.1
Required tools
Preliminary and concluding steps: tool-less
●
Installing connection blades: tool-less
●
8.3.1.2
Preliminary steps
Before installing a double-width connection blade, perform the following steps:
Ê If applicable, open the rack door as described in section
door" on page
Ê Locate the desired system unit as described in section
error class" on page
BX900 S2
60.
74.
48.
45.
Upgrade and Maintenance Manual
"Updating the connection blade
Connection blades
"Closing the rack
78.
"Opening the rack
"Determining the
119