Replacing Sfp+ Transceiver Modules - Fujitsu Primergy BX900 S2 Upgrade And Maintenance Manual

Connection blades
8.4.1.3

Replacing SFP+ transceiver modules

Customer Replaceable Units (CRU)
Average task duration: 5 minutes
Required tools
Preliminary and concluding steps: tool-less
●
Removing SFP+ transceiver modules: tool-less
●
Removing SFP+ transceiver modules
Ê Remove the defective SFP+ transceiver module(s) as described in section
"Removing an SFP+ transceiver module" on page
Installing SFP+ transceiver modules
Ê Unpack the new SFP+ transceiver module.
Ê Verify that the new SFP+ transceiver module is the same type of transceiver
you are replacing.
Ê Install the new SFP+ transceiver module(s) as described in section
"Installing SFP+ transceiver modules" on page
136 Upgrade and Maintenance Manual
133.
127.
BX900 S2