Connection blades
8.3.1.5
Concluding steps
Perform the following procedures to complete the task:
Ê Install the QSFP transceiver modules as described in section
SFP+ transceiver modules" on page 127
Ê Connect the external cables to the connection blade.
Ê If applicable, close the rack door as described in section
door" on page
Ê Configure the connection blade settings as described in section
connection blade settings" on page
Ê Create a backup copy of the connection blade settings as described in
section
"Saving connection blade settings" on page
122
60.
Upgrade and Maintenance Manual
75.
76.
"Installing
"Closing the rack
"Configuring
BX900 S2