Hndr-Net Setup - Honeywell HNDR series User Manual

6. HNDR-Net Setup

• Pressing the HNDR-Net Setup button will generate the following window.
1
[System Setup]
• Sets the settings for site access, network access, initial screen, log write, sound, E-mail, Auxiliary
functions etc. (See the figures shown on pages 59, Chapter 4-2. "System setup" to find out
how to setup the HNDR on pages 31.)
[Camera Setup]
2
• Basic setup for camera : Sets the basic settings for camera, event method, image compression
method, pre/post alarm recording, basic, security, adjust camera frame etc. (See the figures shown
on pages 59, Chapter 4-3. "Basic setup for camera" to find out how to setup the HNDR on
pages 33.)
• Camera recording schedule setup : Sets the recording schedule settings for camera, remote notify
schedule etc. (See the figures shown on pages 59, Chapter 4-4. "Camera recording schedule
setup" to find out how to setup the HNDR on pages 34.)
• Camera motion/Image setup : Sets the motion/image settings for camera, motion detection area,
relay options, color control, motion rate etc. (See the figures shown on pages 60, Chapter 4-5.
"Camera motion/Image setup" to find out how to setup the HNDR on pages 35.)
• Camera Pan/Tilt setup : Sets the Pan/Tilt settings for camera, ptz protocol, communication
connection, speed, auto scan/preset, P/T direction, camera menu etc. (See the figures shown on
pages 60, Chapter 4-6. "Camera Pan/Tilt setup" to find out how to setup the HNDR on pages
36.)
[Sensor Setup]
3
• Sets input/output and interoperation of sensors. (See the figures shown on pages 60,
Chapter 4-7. "Sensor setup" to find out how to setup the HNDR on pages 37.)
[Backup Setup]
4
• Sets an automatic backup schedule. (See the figures shown on pages 61, Chapter 4-8.
"Auto backup setup" to find out how to setup the HNDR on pages 38.)
1 2 3 4
58