Honeywell HNDR series User Manual page 21

9 10 11
[HRX-100, HRX-2000 Control]
9
• Select "HRX-1000" or "HRX-200" PTZ on "Pan/Tilt Settings" of Setup to display the windows (
).
9
[HRX-1000]
• Moving Zoom In/Out and Focus In/Out is available.
• Moving Up/Right Up/Right/Right down/Down/left down/left/left Up is available.
[HRX-2000]
• Moving Zoom In/Out and Focus In/Out is available.
• Moving Up/Right Up/Right/Right down/Down/left down/left/left Up and Auto pan is available.
• Moving Aux1 and Aux2 is available.
• Controlling Camera menu is available. ( GC-655/755 on Honeywell )
[GC-655/755 Control]
10
• Select "GC-655/755" PTZ on "Pan/Tilt Settings" of Setup to display the windows (
).
10
• Moving Zoom In/Out, Focus In/Out and Controlling Camera menu are available.
[HSDN-251 Control]
11
• Select "HSDN-251" PTZ on "Pan/Tilt Settings" of Setup to display the windows (
11 ).
[Preset/ Autoscan/ Tour Function]
• Moving 10 Pre-positions is available. (
~ )
1 0
• Monitoring 1 Auto scan zone is available.
• Continuous monitoring 10 pre-set pre-positions is available (Tour).
[Preset Control]
• Press the "PRESET" button and 1 ~ 10 pre-set Preset buttons to enable operation.
[Tour Control]
• Press the "TOUR" button to enable operation.
[Auto scan Control]
• Press the "A/P" button to enable operation.
[P/T , Z/F, Direction Control]
• Pan/Tilt, Zoom/Focus, and direction change (Up/ Right Up/ Right/ Right Down/ Down/ Left Down
/ Left/ Left Up) are available.
20