Hndr-Net Configuration Setting - Honeywell HNDR series User Manual

2. HNDR-Net Configuration Setting

• This window allows you to change settings for Site (single or multiple) connection, initial
screen, etc. after logging in the HNDR-Net Program. If you don't change connection settings,
you may skip it. Click the "Config" button on the Monitor screen to activate the dialog (See
the figure on page 41).
1
[Change Login Password]
• Allows you to change the password for log in.
[Site Setup]
2
• Allows you to change settings (New(Add)/Modify/Delete) for the site to connect.
3 [Setup Connection Mode]
• Allows you to connect to single or multiple site.
• Multiple site connection is used when the HNDR systems are installed in several locations.
[Display Configuration]
4
• Allows you to setup split screen, storage directory, log file, switching interval, on screen display,
name display, etc. when connecting to HNDR-Net.
5
[Delete Current User]
• Allows you to delete all existing login users.
• For login use, you should renew configuration settings (See page 43).
[Apply/Close]
6
• Applies or cancels the settings on each item.
1
2
3
4
5
6
46