Chapter 5. Application; Manual Backup - Honeywell HNDR series User Manual

Chapter 5. Application

Chapter 5. Application

1. Manual Backup

• This program allows you to back up manually in the desired device. If you set up a backup
schedule in Setup, this backup program executes backup automatically in accordance with the
backup schedule.
1
2
3
[Backup Process]
1
• Allows you to select the date, camera, time, and minute for the desired backup on the left window.
• Allows you to verify the process of established backup on the right window.
• Allows you to backup the Video data and Sound data simultaneously.
2
[Media Path Information]
• Make a folder for back up, and double-click the desired drive and folder.
[Auto Startup]
3
• When the backup setup is completed, if you exit the program with "Auto Startup" checked and
without executing the backup immediately, the "backup program" will start backup automatically
based on the settings next time it is executed.
[Refresh]
4
• Deletes all of settings for the backup process.
[Backup Start]
5
• Starts backup in accordance with the settings. ( Pressing the "Backup Start" button will open a
dialog box to verify the drive and folder for backup. (Be sure to confirm the backup data.) )
6
[Log Viewer]
• Shows you the information on start time and end time of backup.
7
[Backup Viewer]
• Allows you to replay the Video data and Sound data simultaneously.
•You can copy and use Utility.exe, an application in the enclosed CD.
8 [View Hide]
• Puts the backup program in standby mode. (If you set up a backup schedule in Setup, make
sure that the backup program is run and in standby mode.)
9 [Close]
• Exits the backup program.
4 5
6
40
7 8 9