Cisco TelePresence System C20 Administrator's Manual page 62

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction
Experimental NetworkServices UPnP Timeout
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <0..3600>
Example: Experimental NetworkServices UPnP Timeout: 0
Experimental SystemUnit MenuType
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <Indicators/Full>
Example: Experimental SystemUnit MenuType: Full
Experimental SystemUnit SoftwareUpgrade RequireAuthentication
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental SystemUnit SoftwareUpgrade RequireAuthentication: Off
D14637.06 Profile C20 and Quick Set C20 Administrator Guide TC4.2, July 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings Advanced settings
62
Password protection Appendices
Administrator guide
Contact us
www.cisco.com