Camera Adjustments - Cisco C20 User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300

Camera adjustments

You may want to adjust the zoom and pan (which
direction it points) of the camera.
Once you activate the camera control menu, the
self-view (see also the previous page) is switched on
automatically.
In addition you may also adjust the whitebalance
and compensate for any light behind you (backlight
compensation). These topics are discussed in
"Camera Control" on page 37.
Pan
Tilt
Zoom
D14582.15R1 (Rev.1 Nov 2013) User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set,
MX200, MX300. All contents are copyright © 2010–2013 Cisco Systems, Inc. Version TC6.2, 06.2013. English
Tap Camera to invoke
the Camera menu.
Adjust zoom
in and out
here.
7
Use these controls to
define the direction
in which the camera
shall point (also
known as Pan and tilt
controls).
User guide
To exit this menu, putting
changes into effect, tap
anywhere outside the
menu.
www.cisco.com