Editing A Camera Preset - Cisco C20 User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300

Editing a camera preset

Most Cisco TelePresence systems let you create
predefined zoom and camera pointing directions—see
the previous page for details on how to define new
camera presets.
An existing preset may have its pan and zoom altered
or the entire preset may be removed.
If you want to change the name of the preset, you
should delete it and create a new preset.
D14582.15R1 (Rev.1 Nov 2013) User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set,
MX200, MX300. All contents are copyright © 2010–2013 Cisco Systems, Inc. Version TC6.2, 06.2013. English
Tap Camera to invoke
the Camera menu.
Then tap next to preset to be
edited, as outlined.
Tap anywhere outside the menus to exit the menu.
9
Adjust Pan and Zoom as required.
In the submenu tap Update to new
position to put your changes into
effect, or tap Remove to delete the
selected preset.
www.cisco.com
User guide